2019 Volkswagen Tiguan
Mileage
72,050
Service Date
7/3/2026
Services Performed
- Visual Vehicle Inspection
- Drain and refill engine oil, change engine oil filter and lubricate chassis grease fittings and friction points as required. A series of tests and a comprehensive inspection of your vehicle performed by a qualified and experienced technician that knows your vehicle. This service is built around the factory recommended maintenance schedule and our experience, and is designed to maintain your vehicle in its original condition, while preventing costly repairs and breakdowns. During this service the engine oil & filter are changed and more than 30 inspections and tests are performed. We recommend that this service be performed every 12mo or 5000 miles, whichever comes first. Please refer to our oil sticker in the window. During your service a complete inspection & servicing report is generated and given to you so that you can make an intelligent decision about your automotive needs.
- *Confirmed symptom. Performed evacuation and recharge and recovered 338 grams out of 460 gram system. Completed service and AC is blowing cold at this time – No further repairs recommended.* AIR CONDITIONING SYSTEM DIAGNOSTIC INSPECTION – A series of tests and a comprehensive inspection of your vehicles Air Conditioning System performed by a qualified, licensed and experienced technician that knows your BMW. Temperature readings are measured at A/C vent to ensure system is cooling to specification. A visual inspection of the a/c system is performed. Freon is recovered from system and the level documented. Once system is holding vacuum, Freon is refilled to factory specification utilizing the recovered Freon. Our provided Freon contains a colorless UV dye that will aid in tracing future leaks. If any leaks or failed components are present, an estimate of necessary repairs for the AC system will be provided. IF A/C STARTS TO BLOW WARM WITHIN 90 DAYS OF SERVICE, THERE WILL BE A $168.50 FOLLOW UP CHARGE TO RE-EVALUATE THE A/C SYSTEM (PLUS THE COST OF ANY ADDITIONAL FREON REQUIRED).
- *Front brakes are good with 10mm remaining, rear brakes are due with 2mm remaining – Replace rear brakes. Pads, rotors, and wear sensor.*
- Rear brake pads and rotors – Remove and Replace – Both sides – Includes disabling/enabling electronic parking brake system
- SPARK PLUGS – Remove & Replace – All
- Connect flush equipment to remove existing fluid. Additional flush and cleaning chemicals may be added to assist in cleaning system contamination. Fill system fluid(s) to proper capacity with new fluid. Fluid additives and/or conditioners may be added to system. Leak test vehicle system. Perform final road test where applicable.
Brian F. gave our service a 5 star review on 7/3/2026
